|H LED High Bay Light|
Electronic safety grade
AL Spinning member,
CREE X-BD /PHILIPS 3030
WW (*2700-3200K) NW (*4000-4500K) CW (*6000-6500K)
1.The design is novel, the structure is clever, full of modern atmosphere, in line with the trend of the times.
2.In terms of heat dissipation, we have creatively adopted the air convection cavity type aluminum heat sink design. The heat sink has two heat dissipation surfaces on the upper and lower sides, which are transparent before and after. At the same time, there are air convection holes on the left and right sides to enhance the air circulation inside the cavity. It is beneficial to the discharge of heat, thereby effectively improving the heat transfer efficiency of the LED light source.
3.The above unique thermal design ensures a safe operating temperature of high power LED sources below 45 °C.
216° adjustable angle
13 flexible positions makes project angle can be adjusted within 216° .
Waterproof while removing mist, avoiding condensation, improving product quality and extending service life.
High reflective rate
By riveting the heatpipe to the fins, the heatpipe can conduct heat rapidly from chips bottom to the fins, greatly lower down the temperatire of light ,extending the life span.
The reflector is air-jetted and does not fade. The reflectivity is as high as 92%, ensuring the quality of the projected light. Reflective angle: 45°, 60°, 90°, 100°
Led High Bay light is widely used in factory, warehouse,stadium,engineering ,square, golf courses, ships , airports, subway, commercial facilities, outdoor advertising , landmarks ect.
Efficient heat dissipation
Adopting modularization riveting technology and copper pipe heat dissipation body,
Simple assembly enables easy routine maintenance.
Rapid cooling, extend the life of the light source.
Fashionable radiator design,
IP65 Waterproof IP65
Dustproof , waterproof
92% reflective rate
Greatly improve the brightness, energy saving.