Old type high bay light
1.Old type high bay light does not allow frequent start. For each start , the lamp filament impacted by high voltage, the starting current is normal 2 ~ 3 times the current. When activated to accelerate the consumption of electron emitting material on the filament, when the filament Of the electron emitting material exhausted, the lamp life will be finished;
2.Short service life: high bay light life is usually about 3000-5000 hours;
3.Containing a lot of mercury vapor, if broken, it will be volatile to the atmosphere;
4.Traditional high bay lamps will produce a lot of heat, not environmentally friendly; What’s more, it will cause the lamp base aging, the occurrence of high space high bay lamp crash;
5. Produce noise;
6.Using AC power supply, so every second there will be 100-120 times the strobe, affecting vision;
7.Produces UV light that attracts many mosquitoes around the light source.
LED high bay light
1. LED lights energy saving, low power consumption, high luminous efficiency
LED light-emitting high efficiency, single LED power 0.06 ~ 1 watts, using DC drive, single tube drive voltage 1.5 ~ 3.5 volts, current 15 ~ 18 mA.
Fast response, high frequency operation. The same lighting effects, power consumption is one eighth of incandescent bulbs, ordinary mining lamp half.
2. LED lights environmental protection, light and health: LED light source does not contain mercury and lead and other harmful elements conducive to recovery and utilization, but does not produce electromagnetic interference. The ordinary lamp contains mercury and lead and other harmful elements, the ordinary lamp in the ballast will produce electromagnetic interference. LED light color / color Ra value close to 100, the color temperature 5000K, the closest to the sun color temperature 5500K, natural light, light-emitting stable, DC-driven, no flicker, while saving energy to protect the eyes. Common lights are AC drive, it will inevitably produce stroboscopic; and LED light does not contain ultraviolet and infrared rays, does not produce radiation. Ordinary lights contain ultraviolet and infrared light.
3. High security LED lights: LED lights use low-voltage internal drive, the current is small, stable, less fever, cold light source, you can safely touch, is a typical green light source.
4. Long life: LED lamp is called longevity lamp, his light source is a solid cold light source, epoxy resin package, there is no loose parts of the lamp body, there is no filament luminescence easy to burn, thermal deposition and other shortcomings, the service life of up to 50,000 To 80,000 hours, more than 10 times longer than traditional light sources.
5. No noise: LED lamps will not produce noise, the use of sophisticated electronic equipment for the occasion is a good choice. Suitable for libraries, offices and the like.
6. Does not flicker, protect the eyes: the traditional high bay lights use AC, so every second will produce 100-120 strobes. LED lighting is the direct conversion of AC to DC, will not produce flicker, protect the eyes. 6000K cold light gives the visual feeling of cool, help to focus and improve efficiency.
7. No mosquito troubles: LED lamps will not produce ultraviolet light, so not as traditional lamps, there are a lot of mosquitoes around the lamp. Indoor will become more clean and tidy.
8. Wide voltage adjustment range: 100V-240V
The traditional high bay lamp is lit by the high voltage released by the rectifier and can not light up when the voltage drops. The LED lamps within a certain range of voltage can be lit, but also adjust the brightness.
9. LED light installation is simple, supporting a wide range
At present, the traditional appearance of LED lights, installation is very simple, ready to cut into everyday lighting in every part of the space. Coupled with the high energy-saving LED lights, solar energy can be well with the use of wind energy, greatly reducing the cost of outdoor and indoor lighting, reducing the country's electricity load.