Our Factory(Newlamp Lighting)Testing Standards for order UFO high bay lights.

- Mar 01, 2019-

Our LED Factory(Newlamp Lighting)Testing Standards for order UFO high bay lights.

Aging Standards for LED Lights:

1. The aging voltage setting of LED Lights: The low voltage voltage voltage is generally controlled between 85-110V, the atmospheric voltage is controlled between 200-230V, and the high voltage is controlled between 85-110V.

2. Shock time setting of LED Lights: The best time to turn on the lamp is between 2 and 5 seconds, and the time to turn off the lamp is between 0.5 and 2 seconds, such as,If the time is longer than this, the lamp itself has been completely cooled and released, which can not achieve the effect of impact aging.

3. Pulse frequency setting of LED Lights: According to different quality lamps, they are generally controlled to switch 30 times in 60 seconds. If the frequency is lower than this, it will not reach zero.To aging effect, if exceeding this frequency, the actual service life of LED lamps will be greatly shortened or reduced.

4.The switching time of aging voltage of LED Lights is set: the switching time of high, middle and low voltage is generally set to 3-10 seconds, if the switching time is set.Too short, not conducive to the release of internal contactors in aging line, resulting in short circuit inside the machine; too long lost aging effect.

5.Aging time of LED Lights: According to the actual use, it is recommended that the aging time of LED lamps should be controlled in 45-120 minutes.

IJT_UOH]4OLI6)4BPYD32]D