Feature:
1. IP65 waterproof
2. COB light source, elegant design
3.7w, 12w,15w available
Item No. | Power | Dimmension | Hole Size | Number of LEDs | Input Volt | Protection class | Light effect |
XP-DL007FB00-XX | 7W | 2.5" ¢90*45mm | ¢78mm | Epistar COB | AC 85V-265V | IP65 | >80LM/W |
XP-DL010FB00-XX | 10W | 3" ¢108*50mm | ¢95mm | Epistar COB | AC 85V-265V | IP65 | >80LM/W |
XP-DL012FB00-XX | 12W | 3" ¢108*50mm | ¢95mm | Epistar COB | AC 85V-265V | IP65 | >80LM/W |
XP-DL015FB00-XX | 15W | 3" ¢108*50mm | ¢95mm | Epistar COB | AC 85V-265V | IP65 | >80LM/W |
1. Open hole on the ceiling as specified,Diameter:¢95mm;
2. Cut off electricity, connect the driver input with electricity through the hole;
3. Connect the driver output with the lamp;
4. As the photo shows, put the lamp into the hole and adjust it to suitable position
Troubleshooting:
Fault 1、The lamp does not light after connecting the electricity.
Method:Carefully check all wiringsare correct.
Fault 2、The lamp flashes when it is powered on.
Method:Check if the power supply voltage meets the requirement.3
Waring:
Must be installed by a qualified electrician in accordance with local wiring rules and codes.
![]() | Application: Widely used in the office building, shopping malls, supermarkets, municipal engineering school, hospital, hotel, parking lots, factory workshop, household and so on. |
1、Carton label on top left of inner box, product label on lamp; 2、Transportation :Seal the package before delivery, handle gently, and mark product name, quantity and other important information on packing. 3、Storage Requirement:Moisture-proof,dust-proof, anti-pressure, anti-fall, anti-acid substances, avoid direct sunlight and condensation. 4、Storage Time:1year. It should be recheck and make sure the lamp electrical performance up to standard after one year storage. | ![]() |